Question again..

Discussion in 'Lifted' started by White_Lightning, Feb 13, 2012.

Page 1 of 2
  1. Feb 13, 2012 at 5:12 PM #1
    White_Lightning

    White_Lightning dunno comere from sickem

    Age:
    33
    Posts:
    358
    Likes Received:
    0
    Joined:
    Sep 5, 2011
    Location:
    Lovett, Florida
    Well i was going to get 315s but moneys tight right now so i think ima go with 305/75/16s IF i can fit em with a 3"BL and a 3.5" spindle? What do yall think?


    Sent from my piece of shat.
     
  2. Feb 13, 2012 at 5:21 PM #2
    01f1502wd

    01f1502wd going up? yes i am.

    Age:
    37
    Posts:
    8,378
    Likes Received:
    10
    Joined:
    Nov 28, 2010
    Location:
    T.E.X.A.S
    my 9.5in lift can fit 37s possibly 39s....


    I couldnt run 35s on my 3.5in spindle and 2in spring..it rubbed like no other...33s would be best unless you get a lift coil too then your at 8.5in
     
  3. Feb 13, 2012 at 5:37 PM #3
    BlackThundah

    BlackThundah Aka LilWhiteFiddy

    Posts:
    5,222
    Likes Received:
    5
    Joined:
    Jan 18, 2011
    Location:
    Georgia
    You should be fine
     
  4. Feb 13, 2012 at 8:03 PM #4
    White_Lightning

    White_Lightning dunno comere from sickem

    Age:
    33
    Posts:
    358
    Likes Received:
    0
    Joined:
    Sep 5, 2011
    Location:
    Lovett, Florida
    Well im running 285/75/16s now and i clear them pretty good. If i go with the 2" spacers id go with 315s but in tryin to say a couple hunder bucks by not uppin the tire size so much and not getting the spacers.


    Sent from my piece of shat.
     
  5. Feb 13, 2012 at 8:06 PM #5
    01f1502wd

    01f1502wd going up? yes i am.

    Age:
    37
    Posts:
    8,378
    Likes Received:
    10
    Joined:
    Nov 28, 2010
    Location:
    T.E.X.A.S
    ya i hear ya. why dont you save up till you can get a bigger lift and wheels n tires at the same time?
     
  6. Feb 13, 2012 at 9:18 PM #6
    iowaredneck

    iowaredneck Administrator

    Posts:
    21,324
    Likes Received:
    103
    Joined:
    Dec 1, 2010
    Location:
    Iowa
    you'll be fine
     
  7. Feb 13, 2012 at 9:24 PM #7
    ol'red 98

    ol'red 98 Full Access Member

    Age:
    32
    Posts:
    127
    Likes Received:
    0
    Joined:
    Sep 20, 2011
    Location:
    Katy, TX
    you'll be fine the main difference between 305 and 285 is 305 is wider. I'm running 315 on 6.5" lift with no rubbing.
     
  8. Feb 13, 2012 at 9:29 PM #8
    01f1502wd

    01f1502wd going up? yes i am.

    Age:
    37
    Posts:
    8,378
    Likes Received:
    10
    Joined:
    Nov 28, 2010
    Location:
    T.E.X.A.S
    you are an inch taller than i was....and you could run 35s? whats a 315? mine rubbed so bad I couldnt get out of a parking spot.
     
  9. Feb 13, 2012 at 10:58 PM #9
    ol'red 98

    ol'red 98 Full Access Member

    Age:
    32
    Posts:
    127
    Likes Received:
    0
    Joined:
    Sep 20, 2011
    Location:
    Katy, TX
    What wheel are you running? because that's probably why u rubbed

    Sent from my PG86100 using Tapatalk
     
  10. Feb 13, 2012 at 11:10 PM #10
    01f1502wd

    01f1502wd going up? yes i am.

    Age:
    37
    Posts:
    8,378
    Likes Received:
    10
    Joined:
    Nov 28, 2010
    Location:
    T.E.X.A.S
    i had 2in spacers on 01/02 Lightning wheel 18x9.5 with 35x12.5
     
Page 1 of 2

Share This Page