Ok I got p0171 and p0174 lean codes. I replaced the dpfe, cleaned the maf, and fixed 2 vacuum lines. But the codes came back I don't know what to do now. Could it be the intake? And would my tune still work good with stock intake? Sent from my bad ass phone
Get rid of the intake or the tune. I"d return it to stock until you can get some custom tunes from Mike
I was having lean codes. I replaced the fuel pump and put the stock intake back on and no issues now. I'd put the stock intake on and see if they go away.
I mean the truck don't run bad it runs fine. But we got emissions here. I'll grab a air filter tomorrow and put the stock intake on it shoots the codes on stock tune too btw. It feels like it's getting enough fuel too. My uncle has a lean code that comes when it's cold out. Sent from my bad ass phone
The only way you can tell how she's running is to check the plugs. Toss the stock intake on and call it good.
If the stock intake doesnt do it.... I would check the fuel pressure...And check the intake gaskets... Start the engine and spray carb cleaner all around the intake manifold... If the idle changes where you spray there is a leak there.
