ok so has any one changed their whole dash to a difrent color with any method? i would like to turn every part of my interior to black to match my truck a little better
supercrewzn did. Iirc he used Krylon Fusion on the plastics. And some form of a Vinyl paint on the squishy parts. If he chimes in he'll let ya know for sure.
I painted the pieces around the driver side and radio. Left the passenger side same color. Should have pics in my build thread
Ya I understand painting those, my big question is getting all the rest of the dash out to paint it and how to go about painting the steering wheel and squishy parts posted from my texting machine thingy
u gotta clean the hell out of it, then use a good adhesive promotor, and spray it with a lacquer based vinyl paint. Sent from my DROID X2 using Tapatalk
Cleaning and adhesion promoter is your two best friends in this project. Sent from my iPhone4 using Tapatalk
Removing dash is a PITA! I had to remove it to replace heater core. I used Krylon fusion on the plastic and a vinyl paint on the soft spots. I used a red scotch brite on everything, cleaned with wax and grease remover, sprayed with adhesion promoter, then 3-4 costs of paint.
Is there a thread that gives me an idea on removing it? Was the glare bad with krilon? posted from my texting machine thingy
NEVER use glossy paint, satin or matte is there plenty. and ive sprayed more than one dash with it in the truck. just tape everything off with painters tape and to provide good light dont cover the windshield with paper, use cling wrap instead. If you insist on removing the dash REPLACE THE HEATER CORE! its super cheap and preventative maintenance. Sent from my DROID X2 using Tapatalk
