I haven't been on a whole whole lot in the past week and hadn said alot about my truck and what ive been doing to it here lately. First off, I have been throwing the p0401 and p0402 code and I tested the DPFE finally and learned it was messed up. I went to the ford place to get one and they had the wrong part so I went home and ordered one on Rock Auto two days ago and it came in today. I got it on and cleared codes and so far nothing else has come back up but you never know. Idle seems better and runs smoother, but I really have not driven it enough to tell much. I did finally get my Big 3 wiring and all my main amp wiring runs done with 100% Oxygen free copper 1/0 wire. Got all that in and installed my voltmeter on a toggle in my kickpanel. I got my sundown amp in and my box carpeted with a little design on it that is not completely finished yet. Gonna call mike at 5 star again tomorrow and talk with him about doing another tune. Specs on my sub are Sundown Z v.2 12 in a 1.8cuft box wired to 1ohm with aero port tuned to 32. Amp is sundown Sax-1200d which should be putting out around 1400 watts rms. Voltmeter shows im charging at 14.8 with big 3 done. THIS truck Slams now. Sorry for the long post, here is some pictures. more to come tomorrow. Pics of the box in the truck and a good video of the sub will be on here tomorrow.
I used 30 ft of the wire doing my big 3, running the amp all the way to the passenger side of my back seat (I routed the wire through firewall, under kickpanel, under door pillars and up through carpet behind seat), and I ran my amp ground about 2 feet and truly I had about 2 feet or so left over but i just left a little slack in the line and left it behind the seat. Everything neat and tidy. Ill post pics of wires tomorrow. I ran my bass know around my pillars, under my seat and mounted it on the side of my drivers seatbelt so I could demo easier.
Checked ball joints an actually they are still okay. And so are tie rod ends. Wheel bearing isnt bad at all so ill just wait a while Sent from my SCH-I500 using Tapatalk
