well yeah the only thing that changed was the added reflector haha and carl the headlights aren't tinted at all
When you wire up your turn signals you should tap into the rear lights. That way the lights will act as brake lights and turn signals. It's called the Vano mod. And why aren't your caps red????? sent from my igloo
Dylan This is the diagram for your signal mirrors. This is the way I have the lights on the Ranger mirrors wired up. Signal mirror lights are on constant with parking lights and goes off/on/off/on when the turn signals flash. Requires two relays wired in a normally closed configuration. You should find the corresponding wire colors in the passenger kick panel. Though your signal mirror LEDs may be different than red/black.
hmm...I'll try and find my writeup. Though idk if the tow mirrors are different from the regular ones.
Check my work on this Will, I wrote out the schematic form to pin out, color and function. If i'm correct, about that plug you are holding Dylan, the colors on this diagram do not show a blue wire on the passenger side mirror. Passenger Mirror 1. Brown/white ~ Heated Window 3. Yellow/violet ~ Up Down Motor 4. Gray ~ Up Down Motor 5. Gray ~ Left Right Motor 6. Brown/White ~ Left Right Motor 8. Black/Yellow ~ Ground 10. Yellow/Violet ~ Turn Signal/Stop/Hazard 11. Violet ~ Interior Lamps Driver's Mirror 1. Brown/White ~ Heated Window 2. Brown ~ Power Mirrors B 3. Blue/Green ~ Up Down Motor 4. Gray ~ Up Down Motor 5. Gray ~ Left Right Motor 6. Brown/Blue ~ Left Right Motor 8. Black/Violet ~ Heated Window 9. Blue/Gray ~ Power mirrors A 10. Blue/Green ~ Turn/Signal/Hazard 11. Violet ~ Interior Lamps
