It would be sweet, But I'd have to get a tune for the cams them another for the blower. And I'd have to take the top end apart twice. Rather do it all at once sent from my igloo
I was under the impression you didn't wanna drop a ton of cash into it at once? If that's not an issue do it all at once
Lol none of this is going to happen soon. I have a set of Taurus efans I need to wire up, then maybe long tubes. But that'll be it for a while sent from my igloo
No doubt. Need to throw in a built bottom end too. I guess it just all depends on what your going for. If you have no intentions of doing a built motor then just add the supercharger and run 10-12psi. Or you can run cams and a blower and keep the boost down. Power output will be the same and your out another $1000 for cams and associated install stuff plus 2 tunes. You have to remember the stock rods are only going to take so much usually around 650hp and then you have the pistons and transmission to worry with. Personally I would love a set a cams to compliment the blower and add a nice idle. But I'm already running a tune thats holding back 40+ ponies to the wheels because the motor just won't take it. So when I go built I will add cams for sure. It just doesn't make sense to do it on a stock motor with boost.
It would Just be for a stout daily driver. Towing and everything else. With the new trucks running almost 400hp factory I'm feeling left out Lol. Twin-How much power were you making at 10psi? Just with the basic tune and such. Edit: saw your response over pm. I could live with 420hp and 480lb to the wheels! sent from my igloo
