Masonis1 95' F150 build- start to now

I have a upper ho intake and injectors up to 24lb, let me know what you have or I can hit the junkyard this weekend and look for some

 

I should have upper an lower h.o, a set of injectors ill check what lb, got the headers and I got a couple cams, I know one cam is crazy badass, but the other is like an edelbrock performer cam. Ill look an take a couple pics

 

Thanks. You think with a setup I could get 300?

 

With a cam, heads, an intake, maybe some bigger injectors, yea you'd probably be right around there

 

What would I have to do to the computer etc

 

Depending on what you plan on doing, heads, intake an keeping the stock 19lb injectors you might but probably not be able to get away with the stock tune. It be best to get it tuned.Depending what cam you go with also. Best bet would be to have a shop tune it after its all assembled as it'll run best that way. It's a relatively low tech efi system but still having a shop tweak it can help with drive ability an longevity of the engine

 

Alright. Just wondering how much is a tune?
Pm me with some of those 5.0 parts you have.

 

Here is a few pics, headers are gone. The roller rockers are sweet but you'd need 2 more to complete the set. Motor they were on the stud pressed out an shot em into the valve cover. But any questions lemme know. But I've got boxes of pushrods an lifters an got a couple cams, one is crazy as heck the other is pretty mild

 

Pm me some prices,
Do you have the gt40ps?
I would need that throttle body, air intake, heads, cam, and maybe roller rockers.

 

I have some heads but I'm not really looking to unload em haha