New guy to this forum with 2000 f150

So here's the diagrams. I originally had it all on my one diagram but it was way to complicated. The fuse box/boxes as well as the distribution box you see in each diagram is the same box and not different for each circuit. This was my first time drawing circuits on the computer so all the symbols aren't 100% correct either. Also I was kinda confused on what type of switch to use for the fogs and reverse lights. Should it be a spdt or a dpdt? Right now it is set up with a spdt will this be OK?

Off road lights


Fog lights. There is no relay included in this because there is one in the stock wiring harness.


Reverse lights

USB outlet and foot well lights


The thin wire is 16 gauge, the medium is 12 gauge, and the big is 4 gauge. I may upgrade the 12 volt keyed line going to the fuse and distribution box to 14 gauge. Also that distribution block is bigger than 4 terminals, I'm using a 12 terminal block for the project it was just easier to draw it as 4. Each switch that will be powered by the ignition will have its own terminal as well as the USB outlet

 

That 7 amp should probably be a 10 amp and the wire feeding the fuse box and distribution box should definitely be 14 gauge

 

Looks great Jake.
I've used one on the net called scheme-it. www.digikey.com/schemeit/


Galaxy S4 Cetane Powered Android

 

Thank you and I'll have to try using that one, it looks like a nice software.

 

Decided to go with d2s projectors depending on how much I make at my second Job this weekend I'll order them Monday. If they don't get ordered Monday I'm not ordering them

 

TRS has a really good sale right now

 

Yeah there sale is awesome. If I go with D2S it will be 220 with the projectors, shrouds, and fill hid kit. They are also giving out a set of free led bulbs with purchase over 20$ so I'll get a set of those and I already ordered a set of 100mm halos that were $5. I made a really good amount at the tree farm today and tommorow is supposed to be a big day to so I'll order tommorow. It's 275 before the discount and 220 after, or if it's 300 it will be 225 so I may throw something else in there

 

Got some d2s projectors and hid kit on the way

 

So I'm hoping the d2s stuff will be here tommorow and I'm gonna try to get them in my headlights by the end of the week and I probably won't be able to get the mh1s in the fogs until after Christmas but that's OK. For the headlights I'm keeping the same shrouds and just upgrading the projectors to d2s with 50w ballast and the fogs will have the mh1s with a custom foreground limiter and cut off shield and the only shroud I'm gonna be able to fit in there is the mini Gatlings

 

Which fogs are you using? The round ones on my 2007 barely fit the Matchboxes. No way to squeeze an MH1 in there.