It has been 20 years since I did the latch on my '74 and it still functions well today. Greasing and oiling the latch handle mechanism as well as...
@Robert Parzych Ford hasn't changed their design for many years and this video will work. I would lube the bolts going into the side latches as...
@1935 Ford Lost of replacement ball joint options on rockauto.com many say "does not fit OE control arm" rockauto has the replacement upper...
dchawk81 Whats happening ? Galaxy S4 Cetane Powered Android
I wanted to start a discussion about this F-150 truck Ford is proposing to bring to market through in house development. Just depends on the...
Those late bumpside and early dent side Forestry and Fire truck many people call "High Boys" came from Ford Motor Company with steel lift blocks...
Shackles are another suspension lift method depending on length. Too long and side to side sway becomes an issue. The other consideration is, how...
@Chris71Mach1 Trucks have been coming built from Ford for many years with steel rear lift blocks, I agree the aluminum ones I would not use. But...
@ak_cowboy
@The 12gage Are you wanting a budget drop or full blown build? 4" Dream Beams with shackle mounts and hangers from DJM. No shocks, reuse front...
@Kiwithunder Welcome to fordfullsize.com Love the FE engines. My first rebuild was a 351 Cleveland though. I have a 1974 F100 with the 360 2V...
Condolences for the passing of your MIL.
I swear by Lucas Synthetic Oil Stabilizer. Runs $13.88 per quart down here if you know where to find it. Sure it isn't that cheap in AK.
@Mamba2485 Give us an update on what you find.
Welcome to www.fordfullsize.com
@sherryparris Nothing wrong with a flush unless it has been recently done. I use the Prestone Specific Gravity Antifreeze Tester Has a swing arm...
If you go through everything fuel wise, ie filter change first. Check the tank expansion vent line. Mud daubers, and dirt bees can plug this line...
@Mamba2485 Recommended fuel pressure is 55-85lbs When was the last time you changed the fuel filter ? Could be the fuel pump driver module or...
That tint job is nice ! Great you found the rust before it gets ant worse. Agh, hack solder job instead of attaching a new insert connector to...
Looking good on the tints so far. Staying under the tint radar is good unless ya can get a dr.s note. Sent from my SM-G973U using Tapatalk
Separate names with a comma.
